Hộp số giun bao bọc kép Nhà sản xuất

How to correctly select the model and specification of a double-enveloping worm reducer?

When selecting the model and specification of a double-enveloping worm reducer, combined with the expertise and experience of Shanghai SGR Heavy Industry Machinery Co., Ltd. (hereinafter referred to as SGR), the following are some key considerations and suggestions:

1. Identify application requirements
Transmission ratio requirements: First determine the required transmission ratio, that is, the ratio of input speed to output speed. SGR's double-enveloping worm reducers offer a variety of transmission ratio options to meet the needs of different applications.
Torque requirements: Determine the required output torque based on the load conditions in the application. SGR's reducers have a strong load-bearing capacity and can meet the needs of different torque ranges from low to high.
Installation space: Consider the installation space limitations of the reducer, including size, shape, and weight. SGR's reducers are compact and modular in design, and are easy to adapt to various installation environments.

2. Consider the working environment
Temperature range: Determine the temperature range of the reducer during operation to ensure that it can work properly and avoid overheating.
Humidity and corrosiveness: If the working environment has high humidity or corrosive substances, it is necessary to select a reducer with a corresponding protection level to ensure its long-term stable operation.
Vibration and noise: SGR's double-enveloping worm reducer design focuses on low vibration and low noise, but specific applications may require further evaluation based on actual conditions.

3. Consult a professional team
Technical support: SGR has a research and development team composed of doctors and senior engineers who have rich professional knowledge and practical experience. When choosing a reducer, you can contact SGR's technical support team for professional advice and guidance.
Customization service: If the standard model of reducer cannot meet specific needs, SGR also provides customized services. Customers can work with SGR's R&D team to jointly develop a reducer that meets specific requirements.

What are the precautions for the maintenance of double-enveloping worm reducers?

The maintenance of double-enveloping worm reducers is the key to ensure their long-term stable operation. Combined with the expertise and experience of Shanghai SGR Heavy Industry Machinery Co., Ltd. (hereinafter referred to as SGR), the following are some precautions for the maintenance of double-enveloping worm reducers:

1. Regular inspection and lubrication
Selection and replacement of lubricating oil: SGR recommends selecting suitable lubricating oil according to the specific model and application environment of the reducer. Regularly check the cleanliness and oil level of the lubricating oil to ensure that it is within the specified range. According to the manufacturer's recommendation, regularly replace the lubricating oil to avoid the deterioration of oil quality and the decrease in transmission efficiency and wear of components.

Maintenance of the lubrication system: Keep the lubrication system clean and unobstructed, regularly clean the filters and pipes of the lubrication system, and remove impurities and sediments. Check the working condition of the lubrication pump to ensure that it can supply oil normally.

2. Wear inspection of gears and worms
Monitoring of wear conditions: Regularly check the wear of the double-enveloping worm and worm wheel, especially the wear degree of the meshing surface. If severe wear or poor meshing is found, it should be adjusted or replaced in time to avoid further damage.
Adjustment of meshing clearance: According to the use of the reducer, adjust the meshing clearance of the worm and worm wheel in time to ensure the stability and accuracy of the transmission.

3. Cleaning and protection
Keep clean: Clean the housing and internal components of the reducer regularly to remove dust, dirt and other impurities. This helps to maintain the heat dissipation performance of the reducer and prevent corrosion.
Protective measures: Ensure that the reducer takes appropriate protective measures during installation and use, such as installing protective covers, using dustproof pads, etc., to prevent dust, moisture and other contaminants from entering the reducer.

4. Temperature and vibration monitoring
Temperature monitoring: Regularly monitor the temperature of the reducer to ensure that it operates within the normal range. Excessive temperature may indicate problems such as overload, poor lubrication or failure of the cooling system.
Vibration monitoring: Use vibration sensors to monitor the vibration of the reducer, and detect and deal with abnormal vibrations in time to avoid component damage caused by excessive vibration.